Numerical and experimental studies of the strength of compressed steel-reinforced concrete elements made using high-strength concrete and square steel pipes of class C345
Numerical and experimental studies of the strength of compressed steel-reinforced concrete elements made using high-strength concrete and square steel pipes of class C345

Numerical and experimental studies of the strength of compressed steel-reinforced concrete elements made using high-strength concrete and square steel pipes of class C345

DOI: 10.37153/2618-9283-2023-5-53-63

Authors:  

Крылов Сергей Борисович Krylov Sergey B.
Dr. Sci. (Engineering), Head of the Laboratory of Reinforced Concrete Mechanics №8 of NIIZhB named after A.A. Gvozdev of JSC RCC. Moscow, Russian Federation

Marina P. Kornyushina

Researcher at the Laboratory of Reinforced Concrete Mechanics JSC Research Center of Construction, NIIZHB named after A.A. Gvozdev. Moscow, Russian Federation

e-mail: 89263833526@yandex.ru



Rubric:     Theoretical and experimental studies   
Key words: pipe-concrete structures, square steel pipes, steel-reinforced concrete elements
Annotation:

In this article, numerical and experimental studies of the strength of compressed steel-reinforced concrete elements made using high-strength concrete and square steel pipes of class C345 are considered in order to determine the bearing capacity. The main issue in the calculation of pipe-concrete structures is the question of the design strengths of materials working as part of a pipe-concrete section. These strengths differ from the strengths of materials in a uniaxial stressed state and depend on a number of parameters. Concrete with small eccentricities of longitudinal force is in a state of triaxial compression, and its strength increases compared to uniaxial compression. The steel of the pipe is in a flat stressed state. When the eccentricity of the longitudinal force application increases, the strengths of materials approach to the strength under uniaxial compression. The issue of changing the strength of materials with a change in the eccentricity of the longitudinal force has been studied quite well. Therefore, the main issue is the strength of materials in the central compression of the pipe-concrete structure. The work of materials in the composition of a square tube-concrete section is fundamentally different from the work of materials in the composition of a round tube-concrete section. The main difference lies in the uneven lateral compression of concrete in a square pipe.

Used Books:

1.                      Kikin A.I., Sanzharovsky R.S., Trull V.A. Constructions from steel pipes filled with concrete. Moscow: Stroyizdat, 1974. 144 p. [In Russian]

2.                      Gvozdev A.A. Tasks and prospects of development of the theory of reinforced concrete. Construction mechanics and calculation of structures. 1981, no. 6, pp. 14–17. [In Russian]

3.                      Kikin A.I., Trull V.A., Sanzharovsky P.C. To the problem of strength of steel pipes filled with concrete. Izvestiya vuzov. Construction and architecture. 1977, no. 6, pp. 3–7. [In Russian].

4.                      Rosnovsky V.A. Trubobeton in bridge construction. Moscow: Transzheldorizdat, 1963. 110 p. [In Russian].

5.                      Rosnovsky V.A., Lipatov A.F. Investigation of pipes filled with concrete. Railway construction. 1952, no. 11, pp. 27–30. (In Russian).

6.                      Trull V.A., Sanzharovsky P.C. Experimental studies of the bearing capacity of a pipe filled with concrete. Izvestiya vuzov. Construction and architecture. 1968, no. 3, pp. 27–30.

7.                      Strength, structural changes and deformations of concrete / ed. Gvozdeva A.A. M.: Stroyizdat, 1978. 297 p. [In Russian].

8.                      Krishan A.L., Sagadatov A.I., Atkishkin I.V. Distribution of the pressing pressure in the thickness of the concrete mixture. Construction and education: collection of scientific tr. Issue 7. Yekaterinburg: GO VPO "UGTU-UPI". 2004, pp. 108–110. [In Russian].

9.                      Krishan A.L. Pipe concrete columns for multi-storey buildings. Construction mechanics of engineering structures and structures. 2009, no. 4, pp. 75–80 [In Russian].

10.                  Krishan A.L. A new constructive solution of pipe–concrete columns. III millennium – a new world: Proceedings of the International Forum on problems of science, technology and education. 2006, vol. 2, pp. 81–84. [In Russian].

11.                  Krishan A.L., Remnev V.V. Pipe-concrete columns for high-rise buildings. Industrial and civil construction. 2009, no. 10, pp. 22–24. [In Russian]

12.                  Krishan A.L., Melnichuk A.S. Pipe-concrete columns of square section. Housing construction. 2012, no. 5, pp. 19–21. [In Russian].

13.                  Afanasyev A.A., Kurochkin A.V. The use of pipe concrete in housing construction. Industrial and civil construction. 2011, no. 3, pp. 14–15. [In Russian].

14.                  Kurochkin A.V. Erection of frame buildings with load-bearing structures made of pipe-concrete elements. Vestnik MGSU. 2010, no. 3, pp. 82–86. [In Russian].

15.                  Morino S., Tsuba K. Design and Construction of Concrete-Filled Steel Tube Column System in Japan. Earthquake and Engineering Seismology, 2005, no. 1, vol. 4, pp. 51–73.

16.                  Krylov S.B., Arleninov P.D., Dronov A.V. Numerical studies of the work of materials and issues of stability of pipe-concrete columns / In the collection: Hydropower. Hydraulic engineering construction. New developments and technologies. Reports and speeches. Edited by R. N. Onishchuk, V.B. Glagovsky, V.I. Klimovich. 2018, pp. 96–102. [In Russian].

17.                  Arleninov P.D., Krylov S.B. Smirnov P.P. Computational and experimental studies of bent pipe concrete structures. Earthquake engineering. Constructions safety, 2017, no. 4, pp. 34–38. [In Russian].

18.                  Krylov S.B., Obozov V.I., Savrasov I.P., Smirnov P.P. Strength calculation of centrally and off-center compressed pipe concrete structures. Earthquake engineering. Constructions safety, 2016, no. 6, pp. 36–38. [In Russian].

19.                  Storozhenko L.I. Pipe-concrete structures. Kiev: Budivelnik, 1978. 81 p. [In Russian].

20.                  Storozhenko L.I. Strength and deformability of pipe-concrete elements. Concrete and reinforced concrete, 1980, no. 12, pp. 8–9. [In Russian].

21.                  Sambuk I.V. Analysis of the effectiveness of the use of square-section tubular concrete columns. Minsk, Belarus, Belarusian National University. 2014, pp. 122–127. [In Russian].

22.                  Georgios G., Lam D. Axial capacity of circular concrete-filled tube columns. Journal of Constructional Steel Research, 2004, vol. 60, pp. 1049–1068.

23.                  Johnson R.S. Concrete-Filled Steel Tubes. Composite Structures of steel and Concrete, 1984, vol.1, chapter 5, pp.171–177.

24.                  Geniev G.A., Kissyuk V.N., Tupin G.A. Theory of plasticity concrete and reinforced concrete. M.: Stroyizdat, 1974. 316 p. [In Russian].

Возврат к списку